For researchers working in transmission lines modelling with Simulink, here are some useful resources: Transmission line example in Simulink: https://www.youtube.com/watch?v=SjReDvWRTR4 Implementing single-phase transmission line with lumped parameters in Simulink: http://uk.mathworks.com/help/physmod/sps/powersys/ref/pisectionline.html
WiFi repeater are used to extend the coverage area of your WiFi network. It receives your existing WiFi signal, amplifies it and then transmits the boosted signal. With
Irregular sampling or non-uniform sampling is a tricky one because it involves iterative algorithms. However, if you work in signal processing you may deal with the problem of
This Simulink model has become very popular since its publication in Mathworks. It includes the key techniques that the LTE standard implements in the physical layer. The model
The traffic models for LTE such as VoIP, FTP and HTTP are very well explained in this document: http://www.3gpp2.org/public_html/specs/C.R1002-A_v1.0_Evaluation_Methodology.pdf You just need to apply your configuration values to the
Introduction We recently ungraded one of our laptops from Windows 8.1 to Windows 10. Initially, we had no problems with Win 10 and it ran better than Win
Matlab code to capture DVM reading from Agilent/Keysight Oscilloscope using USB connection. Tested on a DSO-X 2012A and on DSO-X 2002A. http://www.mathworks.com/matlabcentral/fileexchange/56349-dvm-data-capture-using-agilent—keysight-oscilloscopes
